— 7 —
C24EO SERIES STEAMER
ELECTRICAL CONNECTIONS
: Electrical and
grounding connections must comply
with the applicable portions of the
National Electrical Code and/or other
local electrical codes.
When making electrical connections, use copper
wire suitable for at least 200°F (90°C). The
steamer must be grounded. The wiring diagram
is located on the inside of the right panel.
Steamers are wired for 3-phase and can be
converted to 1-phase by relocating the jumper
wires on the terminal block as shown on the
wiring diagram.
To Control
Transformer
To Control
Transformer
3-
S , 20
3-
S , 2 0
1-
S , 20
1-
S , 2 0
21
2
21
22
23
2
2
2
22
2
23
2
rimary taps of Control Transformer must be connected
according to the appliance data plate voltage marking and
actual connected supply.
To Control
Transformer
3-
S , 3 0
3-
S , 1
3-
S ,
0
1C
1 T1
2C
T2 2
1C
2 T2
2C
T3
3
2C
T1
1
1C
3 - T3
21
22
23
rimary taps of Control Transformer must be connected
according to the appliance data plate voltage marking and
actual connected supply.
To Control
Transformer
To Control
Transformer
3-
S , 20
2 0
1-
S , 20
2 0
21
2
21
22
23
2
2
2
22
2
23
2
rimary taps of Control Transformer must be connected
according to the appliance data plate voltage marking and
actual connected supply.
For operation from a 20 supply, all elements are to
be connected as shown. For 2 0 supply, disconnect and
insulate element leads with range, reen and ed markers.
ot used for
2 0 operation
