TABLE OF CONTENTS
1. INTRODUCTION
1.1. PRECAUTIONS, REQUIREMENTS, RECOMMENDATIONS
1.2. TRANSPORT
1.3. INITIAL STEPS TAKEN BEFORE THE INSTALLATION
2. STRUCTURE, INTENDED USE, PRINCIPLE OF OPERATION
2.1. INTENDED USE
2.2. PRINCIPLE OF OPERATION
2.3. STRUCTURE (DEFENDER 100-200 WHN, EHN)
2.4. OVERALL DIMENSIONS (DEFENDER 100-200 WHN, EHN)
3. ASSEMBLY
3.1. ASSEMBLY/ DISASSEMBLY OF SIDE COVERS
3.2. ASSEMBLY OF DEVICE
3.2.1. HORIZONTAL ASSEMBLY DIRECTLY ON THE WALL.
3.2.2. HORIZONTAL ASSEMBLY WITH USING INSTALATION HANDLES.
3.2.3. VERTICAL ASSEMBLY DIRECTLY ON THE WALL.
3.2.4. VERTICAL ASSEMBLY WITH USING INSTALATION HANDLES.
3.3. ASSEMBLY AND INSTALLATION GUIDELINES
4. ELEMENTS OF AUTOMATICS
5. START-UP, OPERATION, MAINTENANCE
5.1. START-UP/PUTTING INTO OPERATION
5.2. OPERATION AND MAINTENANCE
6. SERVICING
6.1. PROCEDURE IN CASE OF DEFECTS
6.2. COMPLAINT PROCEDURE
7. INDUSTRIAL SAFETY INSTRUCTION
8. TECHNICAL DATA
8.1. WATER AIR CURTAIN – DEFENDER 100-200 WHN
8.2. ELECTRIC AIR CURTAIN – DEFENDER 100-200 EHN
9. ATTACHMENTS
9.1. ELECTRICAL DIAGRAM OF DEFENDER 100-200 WHN
9.2. ELECTRICAL DIAGRAMS OF DEFENDER 100-200 EHN
9.3. ELECTRICAL DIAGRAMS OF CONNECTION OF DEFENDER 100-200 WHN CONTROL SYSTEM - CONTROL WITH USING A WALLMOUNTED DX CONTROLLER
9.4. ELECTRICAL DIAGRAMS OF CONNECTION OF DEFENDER 100-200 WHN CONTROL SYSTEM - CONTROL WITH USING A WALL-MOUNTED DX CONTROLLER
AND A DOOR SENSOR
9.5. ELECTRICAL DIAGRAMS OF CONNECTION OF DEFENDER 100-200 EHN CONTROL SYSTEM - CONTROL WITH USING A WALLMOUNTED DX CONTROLLER
9.6. ELECTRICAL DIAGRAMS OF CONNECTION OF DEFENDER 100-200 EHN CONTROL SYSTEM - CONTROL WITH USING A WALL-MOUNTED DX CONTROLLER
AND A DOOR SENSOR
10. TECHNICAL INFORMATION TO THE REGULATION (EU) NO 327/2011 IMPLEMENTING DIRECTIVE 2009/125/EC
11. SERVICING
EN:
