VTL TL6.5, Руководство пользователя

Страница: 30 / 56

After trigger sequence, LED will turn OFF if not selected as input. If selected as input,
LED will turn green for single-ended RCA input, blue for balanced XLR input.
Input 3 LED (Phono/Aux 1 )
After power up sequence, LED will turn OFF if not selected as input. If selected as
input, LED will turn green for single-ended RCA input, blue for balanced XLR input.
Inputs 4, 5 and 6 LED (Aux 2, Tuner, Aux3)
Inputs 4, 5 and 6 are for single-ended inputs only. During Power up and trigger
sequence, these LEDs are not lit.
After trigger sequence, LED will stay OFF if not selected as input. If selected as input,
LED will turn green for RCA input.
Tape 1 and 2 LED
During Power up and trigger sequence, neither LED is lit.
After power up and trigger sequence, if Tape 1 is selected as input, LED will turn
green.
If Tape monitor is selected after power up and trigger sequence, LED will turn red.
When Tape 1 is selected as input, only Tape 2 can be used for Tape Monitor. Same
holds for Tape 2.
Tape monitor will be dropped if different input is selected, and will not return after
power down and re-power up.
Mon/Proc LED
During Power up and trigger sequence, no LED.
After power up and trigger sequence, lights red if monitor function selected.
Phase LED
During Power up sequence, no LED.
After power up and trigger sequence, LED off for Phase correct and red for Phase
inverting.
Channel Balance LED
During Power up and trigger sequence, no LED.
After power up and trigger sequence, LED will light blue if channel balance function is
selected.
TL6.5 Preamplifier Owner’s Manual
VTL
25