VTL TL6.5, Руководство пользователя

Страница: 27 / 56

and Tape In connectors, respectively, as per the instructions in the Getting Started section of this
manual. While the tape deck is in recording mode, set the preamplifier to monitor mode by
pressing either Tape 1 or Tape 2 while holding the Mon/Proc button.. This allows the
preamplifier to play back the recording simultaneously while the tape is recording the selected
source. In this mode the volume of the Tape monitor input is regulated by the main volume
control on the TL 6.5.
Caution: Before engaging the Tape monitor switch be sure to turn the volume
control all the way down to 00.
Operating Modes and Factory Default Settings
Powering the TL 6.5 off from the front panel or remote wand will save all of the
existing settings to memory for use at a later power up. Loss of power before the
settings are saved will cause the settings to be lost from memory, and the preamplifier
will have to be programmed again and the settings saved by powering down from the
front panel or remote power buttons. Powering down from the rear rocker switch has
the same effect as loss of power, and does not save settings to memory.
Function Default Mode Indication
Suppress timer countdown Not set Timer decrements
Trigger output None set None
Inputs CD1, CD2, Ph/Aux1
(Defaults to input CD1 selected) Balanced mode Selected input LED
color is blue
Volume setting Zero volume 00 on numeric display
Mute Not selected Mute LED off
Input level offsets Not set None
Phase Phase correct Phase LED off
Channel Balance Not selected, no imbalance Bal LED off
Unity Gain input Not set None
Tape Monitor Not set Mon/Proc LED off
Suppress Out of Balance display Not set None
Programming Lock Out Not set None
TL6.5 Preamplifier Owner’s Manual
VTL
22