VTL S-400 II series Скачать руководство пользователя страница 10

Страница: 10 / 65

Do not attempt to disassemble the amplifier chassis or remove any covers from
the amplifier.

Always consult with your VTL authorized dealer or the VTL factory

support department before attempting any service work on any VTL unit.

Do not touch the tubes after the amplifier is turned on

. Tubes can get very hot while

the amplifier is operating. Turn off the amplifier and allow the tubes to cool down before
attempting to work with the tubes.

Tube components can be heavy and awkward to lift, with the weight unevenly distributed,

and you should not attempt to move the unit without help. The amplifier weighs
approximately

250 lbs.

(

113 Kg)

Do not exceed fuse ratings or attempt to bypass any fuses, as this can cause an
extremely hazardous condition and will void any warrantees. Use only the same type
and rating of fuses as specified in the owners’ manual and marked on the

unit.

S-400 Amplifier Owner’s Manual
VTL

Содержание S-400 II series


































































Результаты поиска

Содержание S-400 II series

Отзывы:

Похожие инструкции для S-400 II series

Бренды по названию

Популярные бренды

VTL S-400 II series, Руководство пользователя

Результаты поиска

Содержание S-400 II series

Отзывы:

Похожие инструкции для S-400 II series

Бренды по названию

Популярные бренды