VTI Instruments EMX-75 Series Скачать руководство пользователя страница 4

Страница: 4 / 61

VTI Instruments

EMX-75XX Preface

ERTIFICATION

VTI Instruments (VTI) certifies that this product met its published specifications at the time of shipment from the

factory. VTI further certifies that its calibration measurements are traceable to the United States National Institute of

Standards and Technology (formerly National Bureau of Standards), to the extent allowed by that organization’s

calibration facility, and to the calibration facilities of other International Standards Organization members.

ARRANTY

The product referred to herein is warranted against defects in material and workmanship for a period of three years

from the receipt date of the product at customer’s facility. The sole and exclusive remedy for breach of any warranty

concerning these goods shall be repair or replacement of defective parts, or a refund of the purchase price, to be

determined at the option of VTI.

For warranty service or repair, this product must be returned to a VTI Instruments authorized service center. The

product shall be shipped prepaid to VTI and VTI shall prepay all returns of the product to the buyer. However, the

buyer shall pay all shipping charges, duties, and taxes for products returned to VTI from another country.

VTI warrants that its software and firmware designated by VTI for use with a product will execute its programming

when properly installed on that product. VTI does not however warrant that the operation of the product, or

software, or firmware will be uninterrupted or error free.

IMITATION OF

ARRANTY

The warranty shall not apply to defects resulting from improper or inadequate maintenance by the buyer, buyer-

supplied products or interfacing, unauthorized modification or misuse, operation outside the environmental

specifications for the product, or improper site preparation or maintenance.

VTI Instruments shall not be liable for injury to property other than the goods themselves. Other than the limited

warranty stated above, VTI Instruments makes no other warranties, express or implied, with respect to the quality of

product beyond the description of the goods on the face of the contract. VTI specifically disclaims the implied

warranties of merchantability and fitness for a particular purpose.

RADEMARKS

Java Runtime Environment™ are trademarks or registered trademarks of Sun Microsystems, Inc. or its subsidiaries

in the United States and other countries. LabVIEW™ and LabWindows/CVI™ are trademarks of National

Instruments Corporation. Visual Basic®, Windows®, and Internet Explorer® are registered trademarks of the

Microsoft Corporation or its subsidiaries. Linux® is a registered trademark of the Linux Foundation. IVI™ is a

trademark of the IVI Foundation. Bonjour™ is a trademark of Apple, Inc.

ESTRICTED

IGHTS

EGEND

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subdivision (b)(3)(ii) of the

Rights in Technical Data and Computer Software clause in DFARS 252.227-7013.

VTI Instruments

2031 Main Street

Irvine, CA 92614-6509 U.S.A.

Содержание EMX-75 Series






























































Результаты поиска

Содержание EMX-75 Series

Отзывы:

Похожие инструкции для EMX-75 Series

Бренды по названию

Популярные бренды

VTI Instruments EMX-75 Series, Руководство пользователя

Результаты поиска

Содержание EMX-75 Series

Отзывы:

Похожие инструкции для EMX-75 Series

Бренды по названию

Популярные бренды