www.vtechphones.com
B
as
ic
o
pe
ra
tio
n
Telephone operation
Temporary tone dialing
If you have pulse (rotary) service, you can change from pulse to touch tone dialing during a call by
pressing
TONE *
.
1 . Dial the number .
2 . Press
TONE *.
Buttons pressed after this send touch tone signals .
3 . After you hang up, the phone automatically returns to pulse service .
Operating range
This cordless telephone operates within the maximum power allowed by the Federal
Communications Commission (FCC) . Even so, this handset and base unit can communicate over only
a certain distance — which can vary with the locations of the base unit and handset, the weather,
an�� the const�uction o� ��ou� ho�e o� o�fice.
I� the�e is a call while the han��set is out o� �ange, it �ight not �ing; o� i� it ��oes �ing, the call �ight
not connect well when you press
TALK.
Move closer to the base unit, then press
TALK
to answer
the call .
If you move out of range during a telephone conversation, there might be noise or interference . To
telephone conversation, there might be noise or interference . To
conversation, there might be noise or interference . To
improve reception, move closer to the base unit .
If you move out of range without pressing
OFF,
the telephone will be left off the hook . To hang up
properly, walk back into range, periodically pressing
OFF.
• Temporary tone
dial mode is useful
if it is necessary
to send touch tone
signals to access
telephone banking
or long distance
services .
• For clearer
reception while on
a call, press the
CHAN
button until
the interference
has been
eliminated .
