www.vtechphones.com
3
Additional information
Problem
Suggestion
Common cures for elec-
tronic equipment .
If the base unit does not seem to be responding normally, try putting the handset in the base unit . If it
base unit . If it
. If it
still does not respond, do the following (in the order listed):
1 . Disconnect the power to the base unit .
base unit . .
2 . Disconnect the handset battery, and spare battery, if applicable .
3 . Wait for a few minutes .
4 . Connect power to the base unit .
base unit . .
5 . Re-install the battery .
6 . Wait for the handset to synchronize with the base unit . To be safe, allow up to one minute for this
base unit . To be safe, allow up to one minute for this
. To be safe, allow up to one minute for this
to take place .
Troubleshooting
To single telephone jack
(RJ11C)
Telephone line cord
Noise filte�
(For DSL users)
If you subscribe to DSL service:
If you hear noise during conversations and/or your caller
ID features are not functioning properly, install a noise
filte� to the telephone line between the base unit an��
the telephone line jack . Contact your DSL provider to
obtain a noise filte�.