18
NOTES
If
OFF
is selected, Power Fail Back-Up mode will not be enabled.
If
AUTO
is selected, the registered handset(s) will display “
TO POWER UP BS PUT
IN CRADLE
´ZKHQPDLQVSRZHULQWHUUXSWLRQRFFXUV3ODFHWKHKDQGVHWZLWKVXI¿FLHQW
battery power (not lower than level 2) onto the main base unit to activate Power Fail
Back-Up and start up the base. If handset is already on the main base unit it will
DXWRPDWLFDOO\DFWLYDWHWKH3RZHU)DLO%DFN8SPRGHLILWKDVVXI¿FLHQWEDWWHU\SRZHU
and start up the base.
If
MANUAL
is selected, the registered handset(s) will display “
TO POWER UP BS
PRESS TALK OFF
” when mains power interruption occurs. Press
and then place
the handset onto the main base unit to activate the Power Fail Back-Up mode and
start up the base.
If a handset is already on the main base unit, just press
.
3RZHU)DLO%DFN8SPRGHZLOOQRWZRUNLIWKHKDQGVHWEDWWHU\SRZHULVQRWVXI¿FLHQW
(not lower than level 2).
Do not pick up the power supplying handset from base when Power Fail Back-Up
mode is activated.
Do not touch the charging contacts of the power supplying handset during Power Fail
Back-Up mode.
In power failure back-up mode none of the base functions and your cordless phone
will operate.
It may take up to 90 seconds to transition through the power failure back-up
activation process as the base and handset(s) synchronize with each other.
4.14.2 Make a Call Using Power Fail Back-Up Mode
If there is only one handset registered to the base:
Once the handset is placed onto the main base unit, enter the telephone number,
and then press
or
. The speakerphone will be turned on automatically and
call is made.
OR
Lift up the handset and enter the telephone number.
Place the handset back onto the main base unit within 60 seconds.
The speakerphone will be turned on automatically and call is made.
Handset may show “
PLEASE WAIT...
” whilst the handset starts up the base before
dialing.
To end the call, press
.
If there is more than one handset registered to the base, the handset on the main
base unit should be left as a power supply of the base and you can use the other
handset(s) to make calls like normal.
NOTE
The handset should always remain on the main base unit for the entire length of the call.
•
•
•
•
•
•
•
•
1.
1.
2.
3.
