VTech ErisTerminal ET635 Скачать руководство пользователя | Manualshive

Страница: 12 / 119

background image

12

ET635 User Manual

Safety, Disposal, Cleaning of Product

FCC part 15

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct the interference at

the user’s expense.
WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Industry Canada

This Class A digital apparatus complies with Canadian requirements:

CAN ICES-3 (A)/NMB-3(A).
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the

device.
Privacy of communications may not be ensured when using this telephone.
The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical

specifications were met.
This product meets the applicable Innovation, Science and Economic Development Canada technical

specifications.

SELV (Safety Extra Low Voltage) compliance

Safety status of input/output connections comply with SELV requirements.

Warning:

To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to

telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and PSTN ports

contain TNV circuits. Some LAN and PSTN ports both use RJ-45 (8P8C) connectors. Use caution

when connecting cables.

C

leaning

To clean the device, use an anti-static cloth. Please avoid cleaning liquids as they might damage the surface or

internal electronics of the device.

«
...
10
11
12
13
14
...
»

Содержание ErisTerminal ET635
























































































































Отзывы:

Нет отзывов

Похожие инструкции для ErisTerminal ET635

Бренд: Panasonic Страницы: 45

Бренд: O2 Страницы: 72

Бренд: Unify Страницы: 2

Бренд: Unitech Страницы: 2

Бренд: myPhone Страницы: 39

Бренд: Caliber Страницы: 10

Бренд: Lephone Страницы: 23

Бренд: Alcatel Страницы: 40

Бренд: Krüger & Matz Страницы: 54

6101 - Cell Phone 4.4 MB

Бренд: Nokia Страницы: 169

Бренд: Coral Страницы: 33

Бренд: Sanyo Страницы: 76

Бренд: Sanyo Страницы: 82

Бренд: Sanyo Страницы: 78

Бренд: Sanyo Страницы: 84

Бренд: Sanyo Страницы: 86

Бренд: Sanyo Страницы: 163

Бренд: Zte Страницы: 90

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды