Settings
14
Area code
If you dial local calls using only seven digits (area code not required), you can
program your home area code so that when you receive a call within your local area,
the telephone number is automatically stored in the call log without the area code.
Press
when the base unit is not in use.
Press or to scroll to
Settings
, and then press
.
Press or to scroll to
Area code
, and then press
.
The base unit displays
Only for 7digit from CID
briefly and then
AREA CODE:
.
Use the dialing keys to enter the 3-digit area code.
Press or to move the cursor to the left or right.
Press
to erase a digit.
Press and hold
to erase all digits.
Press
to save your selection. The screen shows
Area code will not show
in CID
briefly. You hear a confirmation tone.
Loop gain
The default settings of the loop gain feature is
Off
. Turn this feature on only when the
callers cannot hear you well, and you are using a public switched telephone network
(PSTN) line.
Press
when the base unit is not in use.
Press or to scroll to
Settings
, and then press
.
Press or to scroll to
Loop gain
, and then press
.
Press or to choose
Loop gain: On
or
Loop gain: Off
.
Press
to save your selection. You hear a confirmation tone.
Turn the loop gain feature back to
Off
if the callers cannot observe any improvement or are
experiencing any new audio issues like echo or dropout.
1.
2.
3.
4.
•
•
•
5.
1.
2.
3.
4.
5.