background image

43

What does this limited warranty cover?

The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or 
“you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects 
in material and workmanship, pursuant to the following terms and conditions, when installed and used 
normally and in accordance with the Product operating instructions. This limited warranty extends only to 
the Consumer for Products purchased and used in the United States of America and Canada.

What will VTech do if the Product is not free from defects in materials and workmanship during the 

limited warranty period (“Materially Defective Product”)?

During the limited warranty period, VTech’s authorized service representative will repair or replace at 
VTech’s option, without charge, a Materially Defective Product. If we repair the Product, we may use new 
or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or 
refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. 
Repair or replacement of the Product, at VTech’s option, is your exclusive remedy. VTech will return the 
repaired or replacement Products to you in working condition. You should expect the repair or replacement 
to take approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product extends for TWO (2) YEARS from the date of purchase. If 
VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty, this 
limited warranty also applies to the repaired or replacement Product for a period of either (a) 90 days from 
the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original 
two-year warranty; whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

Product that has been subjected to misuse, accident, shipping or other physical damage, improper 
installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; or
Product that has been damaged due to repair, alteration or modification by anyone other than an 
authorized service representative of VTech; or
Product to the extent that the problem experienced is caused by signal conditions, network reliability, 
or cable or antenna systems; or
Product to the extent that the problem is caused by use with non-VTech accessories; or
Product whose warranty/quality stickers, product serial number plates or electronic serial numbers 
have been removed, altered or rendered illegible; or
Product purchased, used, serviced, or shipped for repair from outside the United States of America or 
Canada, or used for commercial or institutional purposes (including but not limited to Products used 
for rental purposes); or
Product returned without a valid proof of purchase (see item 2 on the next page); or
Charges for installation or set up, adjustment of customer controls, and installation or repair of 
systems outside the unit.

1.

2.

3.

4.
5.

6.

7.
8.

Limited warranty

Содержание ErisStation VCS702





















































Отзывы: