VTech Eris Terminal VSP715A Скачать руководство пользователя

Страница: 74 / 74

GPL License Information

GPL code requests

Portions of the software associated with this product are open source, and fall

within the scope of the GNU General Public License (GPL). Accordingly, those

portions of code are available to the public, consistent with the requirements

of the GPL, in either source code format or object code format, depending

upon the nature of the code at issue. If you would like to exercise your right to

receive the available code, please send a cashier’s check, payable to VTech

Communications, Inc., in the amount of $15.00 (U.S.$) to:

VTech Communications, Inc.,

9590 SW Gemini Drive, Suite 120

Beaverton OR 97008

ATTN: Information Technology Group—VSP715A GPL code request

along with a written request for the available code. If your request does not

fully comply with the foregoing requirements, VTech reserves the right to reject

your request. Further, by requesting and receiving the available code, you

release VTech, its affiliates, and its and their officers, directors, employees,

and representatives (“VTech Parties”) from any liability or responsibility

relating to such code, and you acknowledge that the VTech Parties make no

representations with respect to the origin, accuracy, usability, or usefulness of

such code, and the VTech Parties have no responsibility to you whatsoever

concerning the code, including without limitation any responsibility to provide

explanation, support, upgrade, or any communication whatsoever. Your review or

use of the available code is at your sole risk and responsibility.

VTech Telecommunications Ltd.
A member of THE VTECH GROUP OF COMPANIES.
VTech is a registered trademark of VTech Holdings Limited.
ErisTerminal

is a registered trademark of VTech Communications Inc., registered in the United States.

Specifications are subject to change without notice.

United Kingdom

Tel:

+44 (0) 1706 694070

Email:

[email protected]

Website:

www.ukbusinessphones.vtech.com

Middle East

Tel:

+97142880786

Email:

[email protected]

Website:

www.mebusinessphones.vtech.com

Содержание Eris Terminal VSP715A











































































Результаты поиска

Содержание Eris Terminal VSP715A

Отзывы:

Похожие инструкции для Eris Terminal VSP715A

Бренды по названию

Популярные бренды

VTech Eris Terminal VSP715A, Руководство пользователя

Результаты поиска

Содержание Eris Terminal VSP715A

Отзывы:

Похожие инструкции для Eris Terminal VSP715A

Бренды по названию

Популярные бренды