VTech Eris Terminal VSP715A Скачать руководство пользователя

Страница: 5 / 74

telephone base or handset other than specified access doors may expose

you to dangerous voltages or other risks. Incorrect reassembling can cause

electric shock when the product is subsequently used.

13.

Do not overload wall outlets and extension cords.

14. Unplug this product from the wall outlet and refer servicing to an authorized

service facility under the following conditions:

A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled onto the product.

C. If the product has been exposed to rain or water.

D. If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the

operation instructions. Improper adjustment of other controls may

result in damage and often requires extensive work by an authorized

technician to restore the product to normal operation.
E. If the product has been dropped and the telephone base and/or

handset has been damaged.

F. If the product exhibits a distinct change in performance.

15. Avoid using a telephone (other than cordless) during an electrical storm.

There is a remote risk of electric shock from lightning.

16. Do not use the telephone to report a gas leak in the vicinity of the leak. Under

certain circumstances, a spark may be created when the adapter is plugged

into the power outlet, or when the handset is replaced in its cradle. This is a

common event associated with the closing of any electrical circuit. The user

should not plug the phone into a power outlet if the phone is located in an

environment containing concentrations of flammable or flame-supporting

gases, unless there is adequate ventilation. A spark in such an environment

could create a fire or explosion. Such environments might include: medical

use of oxygen without adequate ventilation; industrial gases (cleaning

solvents; gasoline vapors; etc.); a leak of natural gas; etc.

17.

Only put the handset of your telephone next to your ear when it is in normal

talk mode.

18.

The power adapters are intended to be correctly oriented in a vertical or floor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

19. Use only the power cord and batteries indicated in this manual. Do not

dispose of batteries in a fire. They may explode. Check with local codes for

possible special disposal instructions.

20.

For pluggable equipment, the socket-outlet shall be installed near the

equipment and shall be easily accessible.

Содержание Eris Terminal VSP715A











































































Результаты поиска

Содержание Eris Terminal VSP715A

Отзывы:

Похожие инструкции для Eris Terminal VSP715A

Бренды по названию

Популярные бренды

VTech Eris Terminal VSP715A, Руководство пользователя

Результаты поиска

Содержание Eris Terminal VSP715A

Отзывы:

Похожие инструкции для Eris Terminal VSP715A

Бренды по названию

Популярные бренды