VTech Eris Terminal VSP715A Скачать руководство пользователя

Страница: 18 / 74

3. Plug one end of the Ethernet cable into the Ethernet port on the rear of the

deskset (marked by

), and plug the other end of the cable into your

network router or switch.

Note

: You may need to use a network switch connected to your router if your

router does not have sufficient ports for the number of phones you want to

install. If you use a network switch, connect the phone to the switch instead

of the router in the previous step.

If the deskset is not using power from a PoE-capable network router or switch:

a. Connect a compatible VTech power adapter to the deskset power jack.
b. Plug the power adapter into an electrical outlet not controlled by a wall

switch.

If there is a networked computer and no extra Ethernet wall jacks near the phone,

then the phone and PC can share the same network connection.

To share a network connection with a PC:

Plug a Cat.-5 Ethernet cable into the PC port on the phone (marked by

Plug the other end of the Cat.-5 Ethernet cable into your computer’s Ethernet

port.
• If a GigE network is being used, a computer connected through the

phone will be limited to 100 Mbits/s. If you require a GigE Ethernet rate,

use separate Ethernet connections for the phone and the computer.

• If a PC is connected to your network through a phone, any phone resets

and power or network interruptions will disrupt the PC’s connection to the

network.

To network switch or router

Shared network connection

to computer

To electrical outlet

(if required)

Содержание Eris Terminal VSP715A











































































Результаты поиска

Содержание Eris Terminal VSP715A

Отзывы:

Похожие инструкции для Eris Terminal VSP715A

Бренды по названию

Популярные бренды

VTech Eris Terminal VSP715A, Руководство пользователя

Результаты поиска

Содержание Eris Terminal VSP715A

Отзывы:

Похожие инструкции для Eris Terminal VSP715A

Бренды по названию

Популярные бренды