Telephone operation
35
Exiting the menu
On the handset, press
OFF
/CANCEL
to cancel an operation, back up to the
previous menu, or exit the menu display. Press and hold
OFF
/CANCEL
to return
to idle mode.
-OR-
On the telephone base, press
CANCEL
to cancel an operation, back up to the
previous menu, or exit the menu display. Press and hold
CANCEL
to return to
idle mode.
If you pause for too long while creating or reviewing an entry, the procedure
times out and you have to begin again.
Volume control
Using a cordless handset:
During a call, press
/VOLUME
or
/VOLUME
on the handset to adjust the
listening volume.
Using the telephone base:
During a call, press
/VOL
or
/VOL
on the telephone base to adjust the
listening volume.
Handset and speakerphone volume settings are independent.
When the volume reaches the minimum or maximum setting, you hear two beeps.
•
•
Call waiting
If you subscribe to call waiting service from your telephone service provider, you
hear an alert tone when there is an incoming call while you are on another call.
Press
/FLASH
on the cordless handset or
FLASH
on the telephone base to
put your current call on hold and take the new call.
Press
/FLASH
on the cordless handset or
FLASH
on the telephone base to
switch back and forth between the calls.
•
•
Telephone operation
36
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, caller ID log or redial list while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, caller ID log or redial list.
To access a number from the directory while on a call:
Using a cordless handset:
Press
MENU/
SELECT
.
Press
or
to highlight
>Directory
, then press
MENU
/SELECT
.
Press
or
to scroll to the desired entry.
Press
MENU
/SELECT
to dial the displayed number.
Using the telephone base:
Press
MENU/
SELECT
.
Press
/
CID
or
/
to highlight
>Directory
, then press
MENU
/SELECT
.
Press
/
CID
or
/
to scroll to the desired entry.
Press
MENU
/SELECT
to dial the displayed number.
To access a number from the call log while on a call:
Using a cordless handset:
Press
MENU/
SELECT
.
Press
or
to highlight
>Call log
, then press
MENU
/SELECT
.
Press
or
to scroll to the desired entry.
Press
MENU
/SELECT
to dial the displayed number.
Using the telephone base:
Press
MENU/
SELECT
.
Press
/
CID
or
/
to highlight
>Call log
, then press
MENU
/SELECT
.
Press
/
CID
or
/
to scroll to the desired entry.
Press
MENU
/SELECT
to dial the displayed number.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
>Directory
Call log
Directory
>Call log
