VTech 918 ADX, Инструкция по эксплуатации

Страница: 11 / 34

H A N D S E T F E A T U R E S
Flashes in cadence with an incoming ring.
INT.COM LED
Glows steadily when the INT.COM key
is pressed on the Handset
LOW BATT/MUTE LED
Flashes to signify that the Handset bat-
tery pack needs recharging.
Glows steadily when the MUTE key is
pressed during a call.
PHONE (FLASH) Key
Press this key to get a dial tone or answer
an incoming call.
During a call, press PHONE to FLASH
the line. This feature is used in conjunc-
tion with services such as Call Waiting.
INT.COM Key
Press this key to initiate two-way, inter-
nal communication between the Handset
and Base Unit. The Base Unit will emit
two beeps, and will then automatically
enter Intercom mode. The party at the
Base Unit does not need to press any
key to activate this feature, when it is ini-
tiated from the Handset.
OFF Key
Press this key to end a call, exit from In-
tercom (INT.COM) mode or Program
(PRG) mode. You can hang up in the
HOLD mode by pressing OFF.
Handset SPEAKERPHONE(FLASH) Key
The
918 ADX has a speakerphone built-in to
the Handset. The Handset SPEAKERPHONE
provides the same features as the regular
PHONE function of the cordless handset, but
with the added benefit of hands-free operation.
Throughout this manual, whenever a dialing
function is explained,the example given will ref-
erence the PHONE key only. However,this also
applies to the Handset SPEAKERPHONE key.
Press this key to get dial tone or answer
an incoming call.
During a call,press this key to FLASH the
line. This feature is used in conjunction
with services such as Call Waiting.
PHONE LED
Glows steadily when theHandset is in
use.
Flashes slowly when a call is on HOLD.
Flashes rapidly when Handset is in
Program (PRG) mode.
PHONE
INT.COM OFF
MNO
WXYZ
*
900MHz
CORDLESS
MUTE CHAN REDIAL
2
ABC
1
D E F
3
4
G H I JKL
5 6
P Q R S
7
TUV
8 9
TONE
0
OPER
#
PHONE INT.COM LOW BATT/MUTE
MEM
SPEAKER
PHONE
PRG/PR
HANDSET
11
918manual.pm6
3/6/98, 3:21 PM 11