-Using a aluminum motor mounting plate as a template,
mark the plywood motor mounting plate where the four
holes are to be drilled.
-Remove the aluminum motor mounting plate and drill a
7/32”(5mm) hole through the plywood at each of the four
marks marked .
Note: The aluminum motor mounting included with electric
motor set.
Motor mounting plate
The long of the aluminum tubes are same
.
and depend of your motor
Note: The aluminum tubes for the motor
installation not include.
Fuselage - front view
Step 7A
Step 7B
Li-Po battery stand
Step 7D: Battery stand
Step 7C: gear door servo
Secure the battery stand
using four 3x10mm screws
FUSELAGE TOP-VIEW
gear door
gear door
6 8
x 0mm screw
....4
6mm nut
........12
6mm washer
..........8
Adjuting the distance from the fire-wall to
the hub of motor is
.
145mm
RARE BEAR
SECTION 7 - ELECTRIC MOTOR
