1-Move the aileron and flap servo hatch out of the wing
2-Install the aileron servo to the aileron servo hatch as shown.
3-Install the flap servo to the flap servo hatch as shown.
Control horn
................1
2x30mm
..........2
Aileron servo
Hatch
Servo
mount
AIL.
2x30mm screw
Control horn back flat
Control horn
Aileron push rod
Servo hatch
Servo mount
Servo hatch
Servo mount
Aileron and flap servo hatch
(Top view)
Control horn
............1
2x12mm
..........2
SECTION 1- WING: FLAP-AILERON
Step 1A
Step 1B
Step 1C
Step 1B
Step 1C
Step 1D
Step 1D
Connector
...1
Connector
Connector
...1
CA
Do the same way with other wing half.
Clevis
1
Clevis
1
X
Note: If you use only one channel for both the left and right
Flap, in this case, remember to install the left and right
flap servo in a same direction.
CA
Securely glue together. If coming off during
flight, you lose control of your air plane.
Flap, Ailerons Safety:
See Section 11, Step 11c
!
VERY IMPORTANT
If you not make this step, the ailerons and flaps may be comming off when your
airplane flying with high speed. You will lose control of your airplane.
