VPG BHL Nobel AST 3, Инструкция по эксплуатации, Быстрая установка

Страница: 5 / 26

Analogue Signal Transmitter AST 3
1
Introduction
AST 3 is a high performance transmitter, designed for industrial measuring
by means of strain gauge transducers. The compact module is easily
installed on a DIN rail or a flat surface.
Two slightly different versions of the transmitter module are available:
AST 3B, designed for operation together with a control unit.
Instructions for installation and set-up are found on a diskette,
delivered with the transmitter module.
AST 3P, with display window and function keys for set-up and
measuring operations.
This instruction includes the basic installation and set-up, required for correct
measuring with the instrument.
Additional installation and set-up of more instrument functions, not covered by
this description, can also be performed.
For a complete instrument description, refer to publication 600 232:
AST 3 Technical Manual
This description deals with the following points:
•
Using the AST 3P panel for measuring.
•
Quick installation.
•
‘Quick set-up’ for AST 3P.
•
Data sheet calibration.
•
Deadweight calibration in two points.
•
Installation of deltaCOM.
This description does NOT deal with the following points:
•
Connection of relay output.
•
Complete set-up (password, filters etc.).
•
Adjustment of levels and relay functions.
•
Adjustment of the analogue output.
•
Setting of communication parameters.
•
Table calibration.
•
Troubleshooting.
•
Diagnostics.
AST 3P
Transducer
24 V DC
AST 3B
Transducer
24 V DC
Control unit
(deltaCOM)
Figure 1. Different versions need different installation for parameter set-up.