VP ShiniCube 1600TL, Руководство пользователя

Страница: 17 / 58

Fig. 3-1: Installation procedures for the inverter
End Trial run Check
Prepare
Inverter install Electrical install Start
3 Installation
3.1 Safety instruction
The DC voltage at the photovoltaic array side and the AC
voltage at the grid side are both higher than the safe voltage.
It is forbidden to touch any electrified terminal directly. Make
sure the DC side is not electrified before installation and
maintenance.
The inverter must be installed, operated or maintained as per the following standard and
instruction, and it cannot be connected to the grid for power generation unless approved
by the local power supply authority, and all operation must be performed by a qualified
electrical engineer.
All electrical installation must be performed according to the local standard for
electrical installation;
3.2 Installation procedures
See the following instruction for details.
Danger
The inverter is delivered without any user's self-maintenance assembly, so please contact
the local authorized installation and maintenance man if you need to maintain your inverter.
Take care of the hot surface of the inverter. E.g.; the heat radiator of the power semi-
conductor will be kept in a high temperature after the inverter is shut down;
A running inverter has a high voltage, so no internal operation can be made within 10
min at least after the AC and DC power supply of the inverter is cut off and it is made
sure by measuring the DC voltage by a multimeter that the capacity is fully discharged;
No internal part except the wiring terminals can be touched during installation;
Installation ShiniCube1600TL-3300TL User Manual
Victory Power New Energy
VP-UMSC1.0.0EN
8
/47