Voxx ELITE911, Руководство по установке

Страница: 8 / 12

8
1. Installation
2. System Power-Up
• Check all connections and wire routing.
• Turn ignition to the ON position.
• Replace the 20-amp fuse in the module RED wire.
• Turn the ignition off.
M. Shock Sensor (Optional on some systems)
• Using supplied tie wrap, mount the shock sensor to the steering column or a sturdy
brace or wire harness.
• Plug the impact detector onto the 4-pin module connector.
Note: Some shock sensors may already be attached to the harness.
N. Override/Programming Button
The override/programming button must be installed for all installations
• Find a suitable mounting location for the override/programming button. The
selected mounting location should be as difficult as possible for an unautho-
rized person to find. It is recommended that the override button be mounted in
different location in each installation.
• Drill a 9/32 hole mounting hole in the selected mounting location and mount as
shown.
• Connect one of the override button wires to the module brown wire.
• Connect the remaining override / programming button wire to a solid chassis
ground.