Voxx ELITE911, Руководство по установке

Страница: 7 / 12

7
Diagram 9
20A
BLUE/BLACK - LOCK(-)
GREEN/BLACK - UNLOCK(-)
Module Wires
BLUE/BLACK - LOCK(-)
GREEN/BLACK - UNLOCK(-)
Module Wires
1. Installation
Diagram 8
Type 4 - Vacuum Door Lock System
Note: Turning on option 8, the Long Locks feature, in program-
mable options is required with this type of locks.
L. Status Indicator (GRAY Wire on 7-Pin Connector)
• Locate a visible location on the dash with 1
1
/
2
” clearance.
• Drill 1 /
4
” hole and snap the status indicator in place.
• Connect the status indicator BLACK wire to the module GRAY wire.
• Connect the status indicator RED wire to a fused +12-volt source.
K. Power Door Locks (cont.)
To Control Relays
Resistors
Vehicle
Door Lock
Switch
or Plunger
Type 5 - Multiplex Door Lock System
If door lock system
requires (+), connect to
12V+. If system requires
(-), connect to Ground.
12V+
Cut Here
Factory
Vacuum
Pump