Voxx ELITE911, Руководство по установке

Страница: 10 / 12

10
Status Indicator
3. Programming Selectable Options
Note: You can go into option programming mode without exiting the transmitter learn
mode. To do so, do not turn the ignition key off or close the doors at the end of the
transmitter programming section and proceed directly to step 2 below.
1.
Enter the transmitter programming mode as indicated above.
2. Press and release the programming button one time.
The siren will chirp three (3) times to indicate the system is in the option program-
ming mode.
3. Press the ARM button one time to select option #1.
The siren will chirp one time.
Pressing the disarm button on a programmed transmitter toggles the selected
option’s state on or off.
The status indicator (LED) will display the state of the selected option.
Pressing the ARM button on a programmed transmitter selects the next option.
The siren will emit a number of short chirps corresponding to the selected option
number.
Pressing ARM and DISARM buttons at the same time will reset all options to their
factory preset states.
The siren will chirp and the door locks will cycle once to indicate that the options
have been reset to their factory preset programming.
4. When all options are set as desired, turn the ignition key off to exit the options
programming mode.
5. Close all doors to reset the system operation.
Status Indicator
Displays Option Status
(ON or OFF)
Number of Siren Chirps
Indicate Option Number
Button 2
Press to
Turn Option
ON or OFF
Button 1
Press to
Advance to
Next Option
Press BOTH
Buttons (1 and 2)
to Reset all Options
to Factory Settings
Y-10
Y-11
Option Number and Description Bold Type Indicates Factory Settings ON OFF
1 Siren chirps when arming and disarming
YES
NO
2 System arms automatically 60 seconds after last door is closed
YES
NO
3 (1) Siren output enable (2) Horn output enable
(1) (2)*
4 Doors lock when ignition is turned on
YES
NO
5 Doors unlock when ignition is turned off
YES
NO
6 Double unlock pulse enable YES
NO
7 Armed out put enable YES
NO
8 Door lock / unlock output duration is (1)
1
/
2
second or (2) 6 seconds
(2)
(1)
* Siren output is the default on the Y-11, Horn is the default on the Y-10