Voxx Electronics APS787Z Скачать руководство пользователя страница 28

Страница: 28 / 33

APS787Z_RevD_07/20

The Valet Override procedure will disable the alarm when the remote is not available or has become inopera�ve. If the

vehicle door is opened without disarming, the alarm will sound and the vehicle will not start when a�emp�ng to start

with the key. To disable the alarm:

1. Turn the vehicle igni�on to ON.

2. Within ﬁve (5) seconds, press and release valet bu�on on Antenna one (1) �me.

The alarm will silence and the vehicle will now start normally with the key.

Quick Reference:

Alarm Override Procedures

Valet Alarm Override

Unlike the default Valet Override, Custom Code Override is a user personalized code that offers a higher lever of security.

If the user chooses to use Custom Code Override, Feature Bank 2 ; Feature 9 must be programmed for "Custom Code".

Once the op�on has been selected the code must be programmed. Once the Custom Code is programmed it cannot be

changed without ﬁrst disarming the alarm.

Custom Code Override Procedure

The Custom Code is made up of 2 numbers. Each chosen number must be between digits 1-9. The default Custom Code

is "11". To disarm the alarm using the Custom Code op�on:
1. Turn the vehicle igni�on to ON.

2. Within ﬁve (5) seconds, Press the valet bu�on one (1) �me.

3. Within ﬁve (5) seconds, Turn the igni�on OFF/ON.

4. Within ﬁve (5) seconds, Press the valet bu�on one (1) �me.

5. Turn the vehicle igni�on to OFF then ON to start the vehicle.

Custom Code Programming Procedure

In this example, the user has selected Custom Code "23". To program a user selected custom code start with the alarm

disarmed:
1. Turn the igni�on to the ON posi�on

2. Within ten (10) seconds, press the valet bu�on three (3) �mes to enter programming.

3. Within ten (10) seconds, Cycle the igni�on OFF/ON, OFF/ON, OFF/ON. The system will beep one (1) �me.

4. Within ten (10) seconds, Press the valet bu�on two (2) �mes. This number will indicate the ﬁrst digit of the chosen

Custom Code.

5. Within ten (10) seconds, Cycle the igni�on OFF/ON.

6. Within ten (10) seconds, Press the valet bu�on three (3) �mes. This number will indicate the second digit of the

chosen Custom Code.

7. Cycle the igni�on OFF.

If the Custom Code was accepted the LED will flash the ﬁrst number (2), pause, then the second number (3). This will

repeat two (2) more �mes to conﬁrm the Custom Code entry. If a�er 15sec the LED does not flash please repeat steps

1-7.

Custom Code Override

Stand Alone Valet Override is an op�on available to override the alarm without the use of the valet bu�on. This requires

Feature Bank 2, Feature 9 to be programmed for "Stand Alone Valet". Once programmed, to disarm the alarm without

the use of the remote or valet bu�on:

1. Within ﬁve (5) seconds, Cycle the igni�on ON, OFF, ON.

2. Within ﬁve (5) seconds, Press brake pedal three (3) �mes.

Stand Alone Override

Содержание APS787Z


































Результаты поиска

Содержание APS787Z

Отзывы:

Похожие инструкции для APS787Z

Бренды по названию

Популярные бренды

Voxx Electronics APS787Z, Инструкция по установке и справочник

Результаты поиска

Содержание APS787Z

Отзывы:

Похожие инструкции для APS787Z

Бренды по названию

Популярные бренды