APS787Z_RevD_07/20
21
This remote start system is compa�ble with manual transmission vehicles. When Manual Transmission Mode is ac�vated
in Feature Bank 3, Feature 10, this system will monitor mul�ple inputs to safely and securely remote start the vehicle.
Note: A connection to the vehicle's parking brake and tach signal (Analog or Data) is required.
Ready Mode
When manual transmission mode is programmed on, the system will require the user to enter Manual Transmission
Ready Mode. Ready Mode is a procedure that will keep the vehicle's engine running while the user exits the vehicle to
ensure the vehicle is in Neutral.
To activate Ready Mode:
1. With the vehicle's engine running; Set the parking brake to ON.
2. Release the vehicle's foot brake.
3. Ac�vate the Pres�ge remote start by pressing the Start bu�on on the remote control or Carlink App. The vehicle
parking lights will illuminate to indicate the remote start is ac�vated. If you are using a 2-Way remote, the remote
will beep four (4) �mes.
4. Without pressing the brake, set the igni�on key to OFF and exit the vehicle. The engine will remain running.
5. A�er exi�ng the vehicle, close all doors then press Lock on the remote control or Carlink App. The engine will shut
down and the system will sound two (2) short beeps followed by one (1) long beep to indicate Ready Mode is
ac�vated. The vehicle will now remote start when ac�vated.
What can cancel Ready Mode?
Ready mode will be canceled if the system detects any of the following:
•
Open trigger zone (Doors, Hood, or Trunk).
•
Igni�on ON.
•
Parking Brake OFF.
If ready mode is canceled the vehicle will not remote start. The user must repeat Steps 1-5 above to ac�vate Ready
Mode.
Easy Entry Mode
Easy Entry Mode allows the user to gain access to the vehicle without canceling Ready Mode. This can be used to retrieve
forgo�en item or to configure the climate controls for the next remote start cycle.
To use Easy Entry Mode:
1. Remote start the vehicle using the remote control.
2. Enter the vehicle.
3. When ready, Exit the vehicle and close all doors.
4. Press Lock on the remote control. The engine will shut down and the system will sound two (2) short beeps followed
by one (1) long beep to indicate Ready Mode is ac�vated.
Manual Transmission Pit Stop Mode
Manual Transmission Pit Stop Mode allows the user to ac�vate the remote start and exit the vehicle with the key. When
ac�vated the system will keep the vehicle engine running for the run�me selected in Feature Bank 3, Feature 3.
To use Manual Transmission Pit Stop Mode:
1. With the vehicle's engine running; Set the parking brake to ON.
2. Release the vehicle foot brake.
3. Ac�vate the remote start by pressing the Start bu�on on the remote control. The vehicle parking lights will illuminate
to indicate the remote start is ac�vated. If you are using a 2-Way remote, the remote will beep four (4) �mes.
4. Without pressing the brake, set the igni�on key to OFF and exit the vehicle. The engine will remain running.
5. A�er exi�ng the vehicle, close all doors then press Lock bu�on then Start bu�on on remote control. The system will
lock all doors and remain running for the programmed remote start run�me.
Detailed Descriptions:
System Opera�on
Manual Transmission Mode (Ready Mode)
