background image

11

OPREZ

Please read this manual carefully before using this product

Precautions:

1

   The right to interpret the product is only for installation reference, and 

different actual products may be different.

2

   The working pressure of the pipeline is 0.05MPa-0.7MPa, and the 

optimal working pressure is 0.2MPa-0.5MPa.

3

   Comply with local plumbing regulations

4

   Flush the inside of the line before installation To avoid clogging Affect 

water outlet function

5

   Check the water supply line for damage,Replace if necessary

6

   Check connections carefully after installation to prevent water leaks 

prior to up

7

   The ambient temperature is above 0

0

C, if not higher than 0

0

C. The water 

hydrant will be deformed,Frost cracking and other phenomena

8

   The disposal of scrapped products shall comply with the requirements 

of relevant local laws and regulations.

Cleaning and nursing 

To keep the faucet clean and bright, clean the faucet frequently or regularly

1

   Rinse only with water and dry with a cotton cloth.

2

   Do not use any abrasive cleaners or abrasive cloth

3

   Do not use any cleaning agent that has an acidic action 

EN

Содержание V401062















Отзывы: