VOXORT V401062, Руководство по установке

Страница: 12 / 14

12
Installation steps
Before installation, G1 / 2 internal thread pipe
fittings have been installed, with a spacing
of 150mm reserved and kept horizontal.
The pipe fittings shall be vertical and shall
notprotrude from the wall.
Use a level gauge (3) to confirm the
distance between the joints of the
two curved feet, and adjust the two
curved feet to keep them horizontal.
Clean the water supply channel and remove
impurities in the water channel. Wrap the n-joint (2)
with adhesive tape or thread sealant and screw it
into the water supply pipe. After the installation is
solid, the n-joint protrudes from the wall according
to the scope of the clamping point of the level ruler.
After inserting the faucet body (4) into the curved
foot,Make sure that the upper plane of the body is
horizontal and major The back of the body is close
to the wall body (a), and then use sixTighten the
inside of the faucet body with an angle wrench(5)
Top wire.
Imbus ključ