77
ENGLISH
OPERATIONS
How to Use Relay Play and Fader Start
•
Relay Play Using Two Players
When both players are connected to each other via their Relay/Fader Star Connection Hub
, the players can
work in unison by playing tracks one after another from both units.
•
Connecting Two Players with Mixer
For this, select the Single Play mode on both players, using the Single/Continue Buttons
28
. Both displays read
„Single“. Then activate the Play mode on one of the players with the Play/ Pause Button
16
. The fi rst track is
played; the player then goes into Pause mode. The fi rst track of the other player is then played; then this player
goes into Pause mode. After that, the second track of the fi rst player is played, etc.
TIP : You can set a cue point on the standby player to jump directly to that point.
•
Fader Start
By connecting the player to a mixing board that has the fader start feature, the crossfader will engage playback
or cue mode depending on its location. If the player is connected to the left side of the crossfader, playback will
start once the fader is moved from the left most position towards the right. The player will re-cue itself when the
crossfader is brought back to the left most position. Two players can be hooked up in this fashion to work on
both sides of the crossfader.
MCU-300KMA (082412).indd 章節2:77
MCU-300KMA (082412).indd 章節2:77
2012/8/24 下午 05:42:34
2012/8/24 下午 05:42:34
