background image

44

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS 

1.  Read these instructions.

2.  Keep these instructions.

3.  Heed all warnings.

4.  Follow all instructions.

5.  Do not use the apparatus near water.

6.  Clean only with dry cloth.

7.  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that              

produce heat.

9.  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider

than the other. A grounding- type plug has two blades and a third grounding prong. The wide blade or the third prong is 
provided for your safety. If the provided plug does not fi t into your outlet, consult an electrician for replacement of the obsolete 
outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

11. Only use attachments/ accessories specifi ed by the manufacturer.

12. Use only with a cart, stand, tripod, bracket or table specifi ed by the manufacturer, or sold with the apparatus. 

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lighting storms or when unused for long periods of time. 

14. Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  

15. When the mains plug or appliance coupler used as the disconnect device, it shall remain readily operable. 

16. Please keep the unit in a good ventilation environment.

To reduce the risk of fi re or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be 
exposed to dripping or splashing and that no objects fi lled with liquids, such as vases, shall be placed on the apparatus.

To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades 
can be fully inserted to prevent blade exposure.

The lightning fl ash with arrowhead symbol within the equilateral triangle is intended to alert the use to the presence 
of un-insulated “dangerous voltage” within the product’s enclosure that may be of suffi cient magnitude to constitute 
a risk of electric shock.

CAUTION :

 To reduce the risk of electric shock, do not remove any cover. No user-

serviceable parts inside. Refer servicing to qualifi ed service personnel only.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important 
operation and maintenance (servicing) instructions in the literature accompanying this appliance.

WA R N I N G

C A U T I O N

MCU-300KMA (082412).indd   章節2:44

MCU-300KMA (082412).indd   章節2:44

2012/8/24   下午 05:40:49

2012/8/24   下午 05:40:49

Содержание P70mkII
















































Отзывы: