75
ENGLISH
OPERATIONS
•
Using CD/MP3 or external USB device
First of all, you have to insert the USB or CD/MP3 and then press the REC button
14
to active the Recall function.
Rotating the knob
22
to choose the music. If the music had saved Hot Cues/Loops, the player will recall the
saved automately. The LCD display will display “RECALL”. The pads will fl ash one after another. When the last
pad has reloaded, then you can press a pad to recall a cue point or loop.
If the track had saved Hot Cues/Loops, every time you choose the track the display will show “Load Cues?”. In 3
secs, press the Y(Yes) button
27
to recall the saved Hot Cues/Loops from the track. Actually, anytime you can recall
the saved hot cue or loop. Just press the SHIFT button
34
and REC button
14
, the LCD display will display “RECALL”.
CAUTION
: Do not power off the unit right after saving. You must wait at least 3 seconds in order for the
new presets / cue points to be stored in memory.
How to Use Samples
The on-board sampler simply uses cue points and loops, and plays them back from the internal memory,
independently of the audio from the disc or USB driver.
Once cue points or loops are stored to one or more of the Bank Pads
13
, pressing the SAMPLE button
12
once will
engage SAMPLE MODE. The SAMPLE button will illuminate in blue. And then press any Bank Pads
13
to trigger
stored cues or loops as a sample. In saved loop buttons, the sample will continue playing. In saved hot cue buttons,
the sample will play once. The max for the sample is 5 sec.
•
Changing the Sample Pitch and Level
The pitch and level of each sample can be adjusted individually. In order to do so, sample mode must be active,
and the sample you wish to adjust must be playing.
•
To adjust the pitch
With the sample playing, press the X Parameter button
36
and rotate the Jog Wheel to adjust the pitch. The
display indicates the adjustment. Press the HOLD button
35
to keep the adjustment.
•
To adjust the level
With the sample playing, press the Y Parameter button
37
and rotate the Jog Wheel to adjust the sample level.
The display indicates the adjustment. Press the HOLD button
35
to keep the adjustment.
NOTE
: If you didn’t press the HOLD button during you adjust the pitch of sampler, rotating the jog wheel
only for Pitch Bend. Likewise, you only can temporary adjust the volume of the sample.
NOTE
: Every sample can have independent pitch and volume value.
HINT : The audio sample can even play after the disc has been ejected or USB drives has been removed.
MCU-300KMA (082412).indd 章節2:75
MCU-300KMA (082412).indd 章節2:75
2012/8/24 下午 05:42:20
2012/8/24 下午 05:42:20
