Vortice VORT NRG 1500 ECR, Инструкции по эксплуатации и пусконаладке

Страница: 37 / 137

ENGLISH
37
N° Title Description Type Time Cause
programming. See section VII.2
49
AS temp sensor
error
Check value
on Ext Al1
A 5 s
1. The SSG external temperature sensor is out of service
2. The external temperature sensor SSG is wired incorrectly
(see section IV.3)
50
AR temp sensor
error
Check value
on Ext Al3
A 5 s
1. The SRG external temperature sensor is out of service
2. The external temperature sensor SRG is wired incorrectly
(see section IV.3)
55
VAS pressure
sensor error
Check value
on Ext UAI1
A 5 s
1. The 0-10 V signal is inverted
2. The fresh air pressure sender is short-circuited
56
VAR pressure
sensor error
Check value
on Ext UAI2
A 5 s
1. The 0-10 V signal is inverted
2. The recovery air pressure sender is short-circuited
59 CO2 sensor error
Check value
on Ext AI 4
A 5 s
1. The 0-10 V signal is inverted
2. The CO2 pressure sender is short-circuited
85 ...in manual mode
Some functions
have switched to
manual mode.
A 5 s 1. In the Manual/Auto menu all options should be set to Auto.
86
Carry out the
servicing operation Periodic inspection
C 5 s 1. See section VII.1
87 ...in manual mode
Some functions
have switched to
manual mode.
C 5 s 1. In the Manual/Auto menu all options should be set to Auto.
VI.3. Cancelling the “Servicing required” alarm
For these parameter settings, it is necessary to access the setting menu. This requires access authorization at “Function”
level. The procedure is as follows.
Enter the code 2222 using the arrow keys then press OK to confirm. Press the left arrow key twice to access the menus. If you
make a mistake, press C twice and repeat the operation.
A maintenance alarm is generated every 6 months. Enter YES to reset the counter.
Access rights Log on Enter password 2222
Actual level: SERVICE
Impostazioni RAZ contatore filtri Allarme filtro
Resettaggio
del timer: SÌ