11
6
(continued)
6a
Adjust device for top latch retraction position.
Put top latch in locked
position.
While pressing down on
top lift finger
screw
(a-7) so it is seated, tighten
top
locking screw
(a-8).
With pushpad depressed, you should be
able to release top latch with your finger
as shown below.
Using your finger, put top
latch in locked position.
Turn
top lift finger screw
counterclockwise an
additional 2 full turns.
a-1
a-2
a-6
a-4
Released
Locked
a-9
a-10
Depress and
HOLD
push pad (or dog
device) until Step a-6.
If top latch releases, adjustment is
good; proceed to Step a-5.
Otherwise, continue to Step a-3.
Maintain downward pressure on screwdriver
and turn
top lift finger screw
counterclock-
wise to lower lift finger. With other hand,
press on top latchbolt. STOP as soon as top
latch releases.
a-3
Release push pad.
a-5
!
2 additional
turns
a-7
a-8
6b
Adjust device for bottom latch retraction positon.
For 2-Point Latch Only
Push up on
bottom lift finger screw
(b-4)
so it is seated, and tighten the
bottom
locking screw
(b-5).
Release push pad.
Depress and
HOLD
push pad (or dog
device) until Step b-3.
Maintain upward pressure on screwdriver
and turn
bottom lift finger screw
(b-2)
counterclockwise to adjust. Continue
adjusting until
bottom latch pin
reaches
end of travel or until
bottom
lift finger
reaches max adjust. If
bottom latch pin
does not move, see Troubleshooting on
back page.
0
max adjust
end of travel
bottom
latch pin
OR
b-1
b-3
b-2
b-5
b-4
