Volvo V90 2019, Руководство пользователя

Страница: 155 / 674

LIGHTING
}}
153
Using main beam
Main beam is operated with the left-hand stalk
switch. Main beam is the car's strongest lighting
and should be used when driving in the dark for
better visibility, as long as it does not dazzle
other road users.
Steering wheel stalk switch with rotating ring.
Main beam flash
Move the stalk switch backwards slightly to
main beam flash position. Main beam comes
on until the stalk switch is released.
Main beam
Main beam can be activated when the steer-
ing wheel stalk switch's rotating ring is in
position
5 or . Activate main
beam by moving the stalk switch forwards.
Deactivate by moving the stalk switch back-
wards.
When main beam has been activated the
symbol illuminates in the driver display.
Related information
•
Lighting control (p. 148)
•
Active main beam (p. 153)
•
Replacing the main beam lamp (p. 593)
Active main beam
Active main beam is a function which uses a
camera sensor at the top edge of the wind-
screen to detect the headlamp beams from
oncoming traffic or the rear lights of vehicles in
front, and then switches from main beam to
dipped beam.
The symbol represents active main beam.
The function can start while driving in the dark
when the car's speed is approx. 20 km/h (approx.
12 mph) or higher. The function can also take
streetlights into account. When the camera sen-
sor no longer detects any oncoming car or car in
front, main beam is switched on again after about
a second.
5 When dipped beam is activated.