Volvo V60 Cross Country, Руководство пользователя

Страница: 302 / 400

09 Wheels and tires
09
300
*
Option/accessory, for more information, see Introduction.
Changing a wheel – accessing the
spare wheel
The following procedure explains how to
access the spare wheel (where applicable).
1. Release the bag's retaining straps.
2. Lift the bag out of the vehicle and remove
the spare wheel from the bag.
3. Fold up the floor hatch in the cargo area.
4. Remove the jack* and tools* from the
foam block and change the wheels (see
the instructions in the following section
"Changing a wheel").
5. After changing wheels, return the jack
and tools to the foam block and close the
floor hatch.
6. If possible, place the wheel with the
punctured tire in the bag.
7. If there is a wheel in the bag, strap the
bag securely in place in the cargo area.
WARNING
•
If there is a wheel in the bag, the bag
must be securely restrained using its
straps and the load anchoring eyelets in
the cargo area. See (p. 299) and care-
fully follow the instructions.
•
If the wheel with the punctured tire is
too big to fit in the bag, it should be
securely restrained in the cargo area
using suitable straps, a net for anchor-
ing cargo, etc.
Changing a wheel – installing a wheel
It is important to re-install wheels properly.
Re-installing the wheel
1. Clean the contact surfaces on the wheel
and hub.
2. Lift the wheel and place it on the hub.
Tighten the wheel nuts
3. Install the wheel nuts and tighten hand-
tight. Using the lug wrench, tighten cross-
wise until all nuts are snug.
4. Lower the vehicle to the ground and alter-
nately tighten the bolts crosswise to
103 ft. lbs. (140 Nm).
5. Press the plastic covers onto the wheel
nuts and Install the wheel cover (where
applicable). The opening in the wheel
cover for the tire's inflation valve must be
positioned over the valve.