Volvo V60 Cross Country, Руководство пользователя

Страница: 92 / 400

03 Instruments and controls
03
90
*
Option/accessory, for more information, see Introduction.
Tunnel detection (models with the rain
sensor* only)
For models without automatic low beams,
tunnel detection activates the low beams
when the vehicle enters a tunnel. The low
beams are switched off approx. 20 seconds
after the vehicle leaves the tunnel.
The rain sensor reacts to the change in light-
ing conditions when, for example, the vehicle
enters a tunnel and the tunnel detection fea-
ture will then activate the low beam head-
lights. The low beams will be switched off
approx. 20 seconds after the vehicle leaves
the tunnel.
The rain sensor does not have to be activated
for tunnel detection to function.
Related information
•
Lighting panel (p. 87)
•
High/low beam headlights (p. 88)
Active Bending Lights (ABL)*
With ABL activated, the headlight beams
adjust laterally to help light up a curve
according to movements of the steering
wheel (see the right-pointing beam in the fol-
lowing illustration).
Headlight pattern with the Active Bending Light
function deactivated (left) and activated (right)
ABL is activated automatically 17 when the
engine is started.
The function can be deactivated/reactivated
in the
MY CAR
menu system under
My V60
Active Bending Lights
or under
Settings
Car settings Light settings Active
Bending Lights .
See My Car – introduction (p. 74) for a
description of the menu system.
NOTE
This function is only active in twilight or
dark conditions, and only when the vehicle
is in motion.
If a fault should occur in the system, the sym-
bol will illuminate and a message will be dis-
played as shown in the table.
Symbol Display Explanation
Headlamp
failure
Service
required
The system is
not functioning
properly and
should be
inspected/
repaired by a
trained and
qualified Volvo
service techni-
cian.
17 The factory default setting is on.