Volvo V60 Cross Country, Руководство пользователя

Страница: 331 / 400

10 Maintenance and servicing
10
}}
*
Option/accessory, for more information, see Introduction.
329
Onboard Diagnostic System
OBD II is part of your vehicle's computerized
engine management system. It stores diag-
nostic information about your vehicle's emis-
sion controls. It can light the Check Engine
light (MIL) if it detects an emission control
"fault." A "fault" is a component or system
that is not performing within an expected
range. A fault may be permanent or tempo-
rary. OBD II will store a message about any
fault.
Emission inspection readiness
How do states use OBD II for emission
inspections?
Many states connect a computer directly to a
vehicle's OBD II system. The inspector can
then read "faults." In some states, this type of
inspection has replaced the tailpipe emission
test.
How can my vehicle fail OBD II emission
inspection?
Your vehicle can fail OBD II emission inspec-
tion for any of the following reasons.
•
If your Check Engine (MIL) light is lit, your
vehicle may fail inspection.
•
If your vehicle's Check Engine light was
lit, but went out without any action on
your part, OBD II will still have a recorded
fault. Your vehicle may pass or fail,
depending on the inspection practices in
your area.
•
If you had recent service that required
disconnecting the battery, OBD II diag-
nostic information may be incomplete
and "not ready" for inspection. A vehicle
that is not ready may fail inspection.
How can I prepare for my next OBD II
emission inspection?
•
If your Check Engine (MIL) light is lit – or
was lit but went out without service, have
your vehicle diagnosed and, if necessary,
serviced by a qualified Volvo technician.
•
If you recently had service for a lit Check
Engine light, or if you had service that
required disconnecting the battery, a
period of driving is necessary to bring the
OBD II system to "ready" for inspection.
Two half-hour trips of mixed stop-and-
go/highway driving are typically needed
to allow OBD II to reach readiness. Your
Volvo retailer can provide you with more
information on planning a trip.
•
Maintain your vehicle in accordance with
your vehicle's maintenance schedule.
Booking service and repairs
Connected Service Booking (CSB) makes set-
ting up a time for service, maintenance and/or
repairs directly from the vehicle quick and
convenient.
Prerequisites
•
The owner (primary driver) must have a
valid Volvo ID. See Volvo ID (p. 20) for
additional information.
•
The vehicle must be connected to the
Internet using a paired Bluetooth
®
cell
phone. See your Sensus Infotainment
supplement for information on pairing a
cell phone. On models equipped with
Volvo On Call (VOC)*, you can connect to
the Internet using your separate VOC
data plan. Refer to your separate Volvo
On Call manual.
•
By default, the retailer where you pur-
chased your vehicle will be your preferred
(primary) retailer/Volvo authorized work-
shop who will perform service and repairs
on your vehicle. To change the preferred
retailer, go to Dealer Locator at
volvocars.com and select a retailer, click
on Service Scheduler and book an
appointment at the new preferred retailer.
•
In order to be guided through the on-
screen steps, the menu alternative
Display notifications
must be activated.
CSB menu access
Once the prerequisites have been estab-
lished, all CSB-related menus can be