Volvo ECR50D, Руководство оператора, Страница: 62 / 213

In mining applications, a protective roof guard
should be installed. By installing FOPS, the cab is
approved according to FOPS standard. When
operating with a hammer, protective roof and
window guards should be installed. By installing
FOG, the cab is approved according to FOG
standard
NOTICE
Always check clearance between bucket and
Cab/FOG/FOPS guard. Slowly cycle bucket to
check for interference with the Cab/FOG/FOPS
guard. Pay close attention when quick couplers are
used and/or when buckets have lifting eyes welded.
Operator's manual, storage
The Operator’s Manual must be stored in the
storage box (1) on the backside of the operator
seat.
Fire extinguisher, location
Possible location for a fire extinguisher is behind the
seat with a special fixation bracket offered by Volvo
Construction Equipment. Contact your dealer for
further information about this fire extinguisher
fixation bracket.
Emergency exit
The alternative exit path is the sliding window on the
right side (it’s location marked with an information
decal). In case of a turnover or accident, open the
alternative exit path to leave the cab.
V1140430
1
11803657
V1087093
This information decal shows where the
alternative exit path is located.
Other controls
Operator comfort 61