Volvo ECR50D, Руководство оператора, Страница: 140 / 213

Check that fuel lines, hydraulic and brake hoses
and electrical cables have not been damaged by
chafing or are not in danger of being damaged in
that way because of incorrect installation or
clamping. This applies particularly to unfused
cables, which are red and marked R (B+) and
routed:
- between the batteries
- between battery and starter motor
- between alternator and starter motor
Electrical cables must not lie directly against oil
or fuel lines.
Do not weld or grind on components which are
filled with flammable liquids, for example tanks
and hydraulic pipes. Exercise care with such work
also in the proximity of such places. A fire
extinguisher should be kept near to hand.
Actions in case of fire
If the circumstances permit and your own safety is
not jeopardised, take the following steps at the
slightest sign of fire:
1 Stop the machine, if the machine is in motion.
2 Lower attachments to the ground.
3 Move the control lockout lever to locked position,
if so equipped.
4 Turn the ignition key to stop position.
5 Exit the cab.
6 Call the fire brigade.
7 If possible to access safely, turn off the battery
disconnect switch.
8 Attempt to put out the fire, if possible. Otherwise,
move away from the machine and out of the
danger zone.
Actions after fire
When handling a machine which has been
damaged by fire or been exposed to intense heat,
the following protective measures must be followed:
Use thick, protective gloves made of rubber and
wear goggles.
Never touch burnt components with your bare
hands in order to avoid contact with melted
polymer materials. First wash thoroughly with
plenty of lime water (a solution consisting of
calcium hydroxide, that is slaked lime in water).
Handling heated fluoro-carbon rubber, see page
140
.
Safety when servicing
Fire prevention 139