Volvo ECR50D, Руководство оператора, Страница: 136 / 213

Never set a relief valve to a higher pressure than
that recommended by the manufacturer.
Machines, which are used within a polluted or in
another way insanitary area should be equipped
for this kind of work. Special safety regulations
apply when servicing such a machine.
When installing two-way radio, mobile telephone
or similar equipment, the installation should be
carried out in accordance with the manufacturer's
instructions in order to eliminate interference with
the electronic system and components intended
for the function of the machine, see page 19 .
Measures to be taken in connection with electric
welding, see page
163
.
Make sure that all covers on the machine are in
position before the engine is started and the
machine is put to work.
Preventing environmental influence
Be conscious of the environment when carrying out
service and maintenance. Oil and other liquids
dangerous to the environment and released into the
environment will cause damage. Oil degrades very
slowly in water and sediment. One litre of oil can
destroy millions of litres of drinking water.
NOTE!
In common for all points below is that all waste is to
be handed over to a treatment and disposal firm
approved by the authorities.
When draining, oils and liquids must be collected
in suitable vessels and steps taken to avoid
spillage.
Used filters must be drained of all liquid before
they are passed on as waste. Used filters from
machines which work in environments with
asbestos or other dangerous dust, must be
placed in the bag supplied with the new filter.
Batteries contain substances dangerous to the
environment and health. Used batteries must
therefore be handled as waste dangerous to the
environment.
Consumables, for example used rags, gloves and
bottles may also be contaminated with oils and
liquids dangerous to the environment and must in
that case be treated as waste dangerous to the
environment.
Safety when servicing
Before service, read 135