Volvo ECR50D, Руководство оператора, Страница: 176 / 213

Measure Page
DAILY (every 10 hours)
Test-run and check
(start, stop, instruments, warning lamps, lights, wiper, washer, horn,
decals, reflectors, back-up/travel alarm, heater and so on)
Machine, visual check for leakages, loose connections, external damages,
cracks and wear damages
Engine oil level, check
151
Coolant level, check 157
Hydraulic oil level, check
171
Fan belt, visual check for cracks and interferences
Water separator, check and drain if necessary
152
Measure Page
EVERY 50 hours
After carrying out daily service
Machine, lubricate according to lubrication chart
172
Thumb pivot pin, lubricate 172
Hydraulic oil filter, replace (once after the first 50 hours, then every 500
hours)
workshop job
FIRST 50 hours inspection
These inspections shall be performed by an authorized Volvo dealer.
Measure Page
EVERY 250 hours
After carrying out daily and 50 hours services
Tracks, check tension and condition
165
Track gearbox oil level, check workshop job
Measure Page
EVERY 500 hours
After carrying out daily, 50 and 250 hours services
Fan belt, check and adjust tension
workshop job
Engine oil and filter, change (change interval depending on fuel sulphur
content, see page
181
)
workshop job
Water separator filter element, clean 152
Fuel filter, replace (at least once a year) workshop job
Radiator and hydraulic oil cooler, check visually if coolers are clogged with
dirt or debris and clean if necessary
157
Service and maintenance
Lubrication and service chart 175