Volvo ECR 58 Скачать руководство пользователя страница 10

Страница: 10 / 41

2018-03-16

Indicator Rod - Closed

Locking Wedge - Closed

English

Attach the tool

Open the quick coupler and check that

the indication shows that the coupler is

open.

Refer to the Quick coupler section.

Position the quick coupler so that its

coupling mechanism is correctly aligned

with the tool’s attachment frame.
Now slowly pivot the tool by extending

the bucket cylinder.

Adjust with small stick or boom

movements if necessary.

Return the switch for quick coupler

locking function.

The quick coupler’s locking cylinder

returns to its closed position. The

indication on the display confirms that the

switch is in the locked position.

The indicator on the quick coupler shows

that the quick coupler locking function is

in the locked position.
Inspection of quick coupler locking

function

INFO

- If the quick coupler locking function is in the

closed position when the attachment is attached, the

switch must be switched on, off and on again.

Inspection of the quick coupler

locking function

Even if the indication shows that the

locking wedge has engaged in the locked

position, perform the following test to

check the tool is attached securely:
Push the tool forwards towards the

ground, see the figure to the left.

Operate the bucket in this position,

inwards and outwards, to check that

the locking wedge has locked the tool

correctly.
Rotate the quick coupler and check from

the operator position that the locking

wedge/locking pistons have engaged.
In the event of uncertainty, exit the

machine and conduct a visual check.

2200397_ _6909

Содержание ECR 58










































Результаты поиска

Содержание ECR 58

Отзывы:

Volvo ECR 58, Перевод оригинальной инструкции, Страница: 10 / 41

Результаты поиска

Содержание ECR 58

Отзывы: