Volvo EC15E, Руководство оператора

Страница: 103 / 238

Caution on slopes
Be careful when opening or closing the doors on
a slope, operational force may be changed
rapidly. Make sure to keep the doors closed.
Do not descend backward on a slope.
Operate the travel function slowly when
approaching or descending a slope.
Do not change direction or travel a cross on a
slope. Change direction on level ground, if
necessary first come down to level ground and
make a detour.
If the machine slides, immediately lower the
bucket to the ground. The machine can turn over
due to unbalance. Especially, do not swing with
loaded bucket. In unavoidable case, pile up earth
on the slope, and then make the machine level
and stable.
While travelling on a slope, keep the angle
between boom and arm at 90 - 110°, raise the
bucket 20 - 30 cm from the ground.
If the engine shuts down on a slope, lower the
attachment to the ground. Do not operate the
swing function since the superstructure may
swing under its own weight and cause tipping or
side slipping.
Do not park the machine on a slope and leave it
unattended.
Working in water and on boggy ground
When wading with the machine across a water
course, use the bucket as a "feeler" if the water is
muddy. The water course may have hidden
obstacles under the surface or the depth may
change suddenly, endangering the operator and
the machine. While wading, stop the machine now
and then and swing the bucket sideways just above
the bottom. This operation reveals stones or other
obstacles. Prod the bottom with the bucket to
measure the depth in order to discover any
dangerous hollows.
After working in water, the lubrication points on
the undercarriage, which have been under water,
must be lubricated, so that the water is driven out.
Operating techniques
Working within dangerous areas 101