Volvo 2015 S60, Руководство пользователя

Страница: 66 / 406

02 Locks and alarm
Remote key and key blade
02
64
Opening the remote key/PCC
Slide the spring loaded catch to the
side.
Pull the key blade straight out of the
remote key.
Insert a small screwdriver in the hole
behind the spring loaded catch and care-
fully pry up the cover.
NOTE
Turn the remote key with the buttons
upward so that the batteries do not fall out
when the cover is removed.
Replacing the batteries
CAUTION
When handling batteries, avoid touching
their contact surfaces as this could result
in poor battery function in the remote key.
Note the position of the battery's (
+
) or (
–
)
sides.
Remote key (one battery)
1. Use a screwdriver to pry out the old bat-
tery.
2. Insert a new one with the (
+
) side down-
ward.
PCC (two batteries)
1. Use a screwdriver to pry out the old bat-
teries.
2. Insert the first new battery with the ( + )
side upward.
3. Insert the plastic spacer over the battery.
Insert the second new battery on top of
the plastic spacer, with the + side down-
ward.
Re-assembling the remote key
1. Press the remote key's cover into place.
2. Hold the remote key with the slot for the
key blade up.
3. Carefully slide the key blade into its
groove.
4. Gently press the key blade in the groove
until it clicks into place.
NOTE
Volvo recommends that the batteries used
in the remote control meet the UN Manual
of Test and Criteria, Part III, sub-section
38.3.
Batteries mounted in the key from the fac-
tory and batteries exchanged by an
authorized Volvo workshop fulfill the above
criteria.
Old batteries should be disposed of prop-
erly at a recycling center or at your Volvo
retailer.