Volvo Penta V6-200, Руководство оператора

Страница: 70 / 114

Annual Service or Every 100 Hours
(Continued) Check/
Correct
Fill/
Lube
Adjust/
Tighten
Clean
Change/
Replace
Sterndrive
Anodes – Visual inspection; replace if eroded more
than 30%
●
Bellows, U-joint, and Exhaust – Check for wear,
damage; replace every four years
(1)
● ●
Propshaft, Propeller, and Hub – Check for damage,
corrosion; lubricate shaft, splines
● ● ●
Power Trim/Tilt – Check for proper operation ●
U-joint Shaft Splines
(1)
– Lubricate
● ●
U-joint, Gimbal Bearing – Check for wear, corro-
sion
●
Gear Oil – Change ●
Miscellaneous
Batteries and Connections – Batteries hold charge,
connections clean and tight
● ●
Engine Alignment – Check ●
General Inspection – All engine and drive hard-
ware; clamps, screws, nuts, etc.
● ●
Power Steering – Check for proper operation,
check hoses and components for leaks
●
Power Steering Fluid – Check level ● ●
Steering System Cable(s) – Check for proper oper-
ation, lubricate
●
Remote Control and Shift System – Check for
proper operation
● ●
1) The drive must be removed for this step. This is a good time to check and/or replace both bellows.
1. TSK serial number A294174 and above, earlier serial numbers
must change every two years.
Maintenance Schedule
68 47706041 07-2014 © AB VOLVO PENTA