Volvo Penta V6-200, Руководство оператора

Страница: 48 / 114

Draining the Engine
Draining Raw Water Cooled Engines
1 With the engine turned off, locate and open all
drains located on both sides of the engine. Raw
water drains have blue heads.
NOTICE! Be sure that all water is drained from the
engine. If no water drains, use a piece of wire to clear
any obstructions from the drain holes.
NOTICE! If possible, when draining the engine, raise
or lower the bow of the boat to keep the engine level.
This will provide for complete drainage of the block and
manifold. If the engine is not level, some water may
remain trapped.
NOTICE! When draining the starboard manifold, take
care to direct the drained water away from the starter
to prevent water damage to the starter.
2 Loosen the hose clamps and remove the hoses
from the raw water pump.
3 Loosen the hose clamp on the large diameter hose
and remove it from the circulation pump.
4 After engine is thoroughly drained, reattach hoses
and drain plugs. Tighten clamps and plugs.
22848-f
51534
51604
Engine Shutdown
46 47706041 07-2014 © AB VOLVO PENTA