Volvo Penta TAMD162C, Инструкция

Страница: 35 / 84

1234567890123456 1
23456789012345
6
1
23456789012345
6
1234567890123456 1234567890123456 1
23456789012345
6
1234567890123456
Open vent screw (1). Pump with hand pump (2) until fuel containing no air
flows out. Then pump a further 10–20 times with the hand pump. Tighten
the venting screw (1). Check for leaks. If the engine does not start, vent
the pressure pipes on the injectors.
Observe strict cleanliness! The fuel in the system must not become
contaminated.
50 hours 500 hours 1000 hours 2000 hours 24 months 50 hours 400 hours 800 hours 1200 hours 24 months
Close the sea cock and drain the water from the seawater and freshwater
systems with the drain cocks (A).
No. Action TAMD162C, TAMD163P Instructions
Info.
pages
TAMD163A
17. Venting the fuel system.
18. Have authorized personnel
check injectors.
19. Check and clean seawater
filter.
Note. The seawater filter can require cleaning
more frequently (experience will indicate the best
interval after a period of running the engine).
20. Replace freshwater filter.
21. Check/clean heat exchang-
er, charge air cooler (CAC),
and the reverse gear oil
cooler.
22. Clean the engine coolant
system and change cool-
ant.
If necessary take the injectors to an authorized workshop.
Tightening torque: Injector 50 Nm (5 kpm), delivery line 15–25 Nm, (1,5–2,5
kpm).
Close the sea cock. Remove cover and lift the insert. Clean insert and
housing. Reinstall components. Open the sea cock and check for leaks.
Not to be carried out at the same time the engine coolant is changed as
the concentration of anti-corrosion agent in the coolant may be too high.
Close sea cock and drain the water from the seawater and freshwater
systems.
51
–
55
–
56
24,55