Installation and Operation Manual | VOLTI Home Charging Device
5
VOLTI Home is designed, developed, tested and manufactured according to the latest safety standards.
Following the instructions in this manual and other relevant safety documents ensures proper installation
and operation. Proper installation and operation will minimize the risk of personal and property damage.
NOT FOLLOWING THESE INSTRUCTIONS CAN RESULT WITH DEATH, INJURIES AND DAMAGE TO
YOUR DEVICE.
The manufacturer assumes no liability for resulting claims!
The installation as described in this manual must be performed by qualified electricians with the
requirements mentioned in this document.
The maintenance of this product is only expressly permitted to VOLTI authorized persons. Any work done
besides of installation and operation by other parties will result with the loss of warranty.
⚠
DANGER
Danger of electric shock and fire hazard!
Never open the front cover. If the front cover is opened, product safety can no
longer be guaranteed. Please don’t use the product!
For the installation, only the installation cover, on the back of the product, can be opened. The front part of
the device is tightly shut during the manufacturing process. If the front cover is opened, the device loses its
compliance with the latest safety standards, and is no longer deemed operable, thus it is no longer covered
by the device warranty.
The manufacturer assumes no liability for resulting claims!
2. Safety Notes
⚠
WARNING
Risk of electric shock and fire hazard!
Following tasks must be performed by electricians with correct training, qualification
and authorizations. Installing persons are fully responsible for complying with the
existing standards and regulations:
Installation, commissioning, maintenance, adjustment.
-
Vehicle manufacturers and/or national regulations may require additional overvoltage
protection to be installed.
-
Vehicle manufacturers and/or national regulations may require additional fault-current circuit
breaker (RCD Type-B) with a different triggering characteristics.
Never install or use a damaged device.
If damaged, charging station must be decommissioned by a qualified electrician.
Replacement and/or repairing of the device is strictly forbidden and must only be done by
VOLTI authorized persons. Please contact your sales channel.
No modifications can be made to the charger outside of what is included in this document.
All the markings must be kept on the device (e.g. safety signs, operating warnings, device
information etc.)
Do NOT use dirty, worn-out or faulty charging connectors.
Do NOT use any sort of extensions with the charging station, charging station cable or other
electric carrying parts.
