Installation and Operation Manual | VOLTI Home Charging Device
17
6.3
Error Catalogue
LED Indicator
Status
Error
Potential
Cause
Potential Solution
Red Solid followed
by Red blinking
individual LEDs
Critical Fault
Occurred
VOLTI Charging Station has
encountered a critical error.
Disconnect from your vehicle and
do
NOT
use the charging station.
Refer to the troubleshooting
section of this guide.
Over-current
Detected
Overload detected
on the electric
vehicle side
Disconnect charging station from
your vehicle. Contact your
electric vehicle manufacturer or a
qualified electric technician.
Over-voltage /
Under-voltage
Detected
The line and neutral
wires are reversed
Your device may be critically
damaged.
Disconnect charging station from
your vehicle. Contact a qualified
electric technician.
Ground Fault
Grounding / Earth
connection is
interrupted
Disconnect charging station from
your vehicle. Contact a qualified
electric technician.
Residual Current
Detected
Grid or vehicle
related critical
residual current
detected, charging
stopped
Open the circuit breaker on the
supply line that powers the
VOLTI Charging Station.
Contact a qualified electric
technician.
Self-Test Failed
Hardware Error
Detected
Turn VOLTI Charging Station
OFF and back ON again. If the
self-test fails again, please
contact Technical Support.
