Installation and Operation Manual | VOLTI Home Charging Device
4
1.2 Document symbols
⚠
DANGER
This sign means imminent danger. Not following this instruction will result in
serious injury
even
death.
⚠
WARNING
This sign means possible danger. Not following this instruction may result in
serious injury
even
death.
⚠
CAUTION
This sign means dangerous situation. Not following this instruction may result in
minor injury.
ⓘ
INFO
This sign means that an important information is provided for assistance.
1.3 Abbreviations and technical terminology
Abbreviation
Meaning
AC
Alternating current
DC
Direct current
EMC
Electromagnetic compatibility
EV
Electric vehicle
EVSE
Electric vehicle supply equipment
MiD
Measuring Instruments Directive
NFC
Near field communication
OCPP
Open Charge Point Protocol
PE
Protective earth
PPE
Personal protective device
RFID
Radio-frequency identification
1.4 Requirements
This document is intended for the following persons: Electricians, End-users
Electricians are the persons underwent the required training to know most recent standards, has the
required expertise and experience, and is able to assess the work performed below and the possible
hazards in relation to his/her expertise.
The person to perform the installation tasks shall have the following knowledge:
Most up-to-date safety information
Operating principles of the products
Basic knowledge of network communication
Diagnostic knowledge and problem solving capability
Device setting configuration
End-users are the persons who will be using VOLTI Charging Station to charge their vehicles. These
persons are only responsible of maintaining and operating the VOLTI Charging Station. End-users must
NOT perform the installation!
1.5 Intended use of the product
VOLTI Home charging station is designed for charging electric vehicles such as battery electric vehicles
(BEV) and plug-in hybrid electric vehicles (PHEV). The use for charging any other devices is not allowed.
VOLTI Home is designed to be used indoors and outdoors. The charging station must be installed vertically
on a flat wall surface or on a floor-fastened pillar. For installation, national and local regulations must be
adhered to. The use of the charging station must also comply with environmental regulations.
